This Chip is for the Swapped or Stock H23A Motor Using OBD1 P06, P05, PR4, P75 ECU
OR If you have the Socketed OBD1 VTEC P28 P72 P08 P30 P61 & P91 Ecu Then you can you use this Base Map chip on that ECU As well
 
If This is a Swap Motor Going in to 1996 to 2000 Civic, CRX, Delsol, Integra, Accord, Prelude or  CRV  you must use the OBD2 to OBD1 Step Down Harness and the OBD1 ECU Such As P06, P05, PR4, P75, P28 P72 P08 P30 P61 P91 to use this Base map chip
 
This Base Map Tuned Chip is for  H23A Non-Vtec engine, this chip Has the Power and Torque through out the entire 6900 RPM, This is good for drag / Circuit racing.
 
Chip modifies the timing / Fuel curve to increase horsepower throughout the power band. Depending on your engine Setup, expect 7 - 14 horsepower just from this chip
 
 H23A Non- VTEC Base Map Chip Info
REV Limit: 6900 rpm
Idle: 850 rpm
Knock sensor: DISABLE / or Enable
speed limiter DISABLE
02 : DISABLE / or Enable
 
 
Shift Light : ( if you want the shift light. Must let me know which RPM you want it set at)
 
BONUS: 2 Step Launch (OPTIONAL with Request, and only will work with hydro Tranny with the Hydro speed sensor,) It will not work with the cable tranny with the mechanical speed sensor, If you want the 2 Step launch please do leave a note when you buy the Chip
 
I can also disable other sensor as well
 
EG, EF, SIR, SI, EF9, EM1, EF9, CRX, CIVIC, INTEGRA, DEL SOL, CRV, Accord, Prelude
 
IF THE ECU IS NOT SOCKETED THEN PLEASE LOOK IN MY OTHER ITEM FOR SALE AND YOU WILL FIND THE CHIPPING KIT TO MODIFY THE OBD1 ECU, IF YOU HAVE ANY QUESTION DONT HESITATE TO ASK, ill Be Happy To Assist You